RCHobbyHelicopter.com

Newly Tested Hirobo S.R.B. Quark R/C Helicopter

2008-05-03T17:09:00.000-07:00

I just got Finished testing the Hirobo S.R.B. Quark R/C Helicopter Today.

My Impressions are:

This is a very stable Heli and would be good for the beginner and intermediate Pilot. Perfect for flying in your livingroom!

DETAILED DESCRIPTION:
Features:
Indoor or Outdoor flight (Outdoor flight at less then 3mph winds)
Foam Main and tail blades to prevent injury and damage
Soft plastic stabilizer to absorb damage. At the time of a crash, the whole stabilizer comes off to lessen the damage
On the Rotor Head, the bell, Hiller, and pitch is fixed. Blade and stabilizer angle is fixed at a 45°angle. While the head design is not for acrobatics, ARB will be the most stable helicopter in the same class.
The Main circuit unit includes FM PPM reciever, gyro and ESC(for both main and tail rotor)
A new designed battery and charger is used. The lightweight battery enables 10 minutes of flight with approx one hour charge. Charger is eqipped with cell balancer.
Includes:
Tool sets: Phillips/ slotted screwdrivers, 0.89mm/1.5mm L wrenches
S.R.B. Charger
S.R.B. Battery
Blade Balancer
Spare blades (4 sets Main Blades, 4 sets Tail Blades)
4ch Transmitter (transmitter from the X.R.B. series can be used as well)
Red and yellow decals
Specifications:
Gear Ratio: 5.29:1 (Main Blade), 4:1 (Tail Blade)
Length: 350mm
Height: 146mm
Width: 72mm
Main Rotor Diameter: 355mm
Tail Rotor Diameter: 106mm
Weight: 170g

I will see if i can stock this great heli on our website soon!

Happy Hovering, John w.

Another fun to fly heli we sell

2008-04-27T15:43:00.000-07:00

This is a Fun to Fly Micro-Heli That is a kit that is built up from an existing helicopter Know as the Walkera 4-3 r/c helicopter.

MIA Micro-Flight Makes the Various Kits We sell on our site.

They Come in three versions:

In G10 Fiberglass, one with rigid skids and one with Flex Skids.

The Carbon Frame Set comes in flex Skids.

Kit Build:

Required to build this little gem are as follows

1- Walkera 4-3 complete helicopter ready to fly

1- MIA Frame Set any one of the three models.

Remove from the Walkera Heli the motors, servos, reciever Battery, and all Mechanics.

Re-install them on the MIA Frames Set you Have Pre-assembled.

And There you have it one sweet handling Heli!

Micro-Helicopter Specs:

Over all length: 185mm

Main Rotor Diameter: 180mm

Tail Rotor Diameter: 50mm

All-Up Weight 46grams

Tail Motor: N51

Main Motor:1215

Built -in Gyro

FM or 2.4GHZ recievers

FM or 2.4GHZ Transmitters

Micron V2 Going Brushless!

2008-04-24T16:23:00.000-07:00

This Blog is all about Building a custom All-Brushless Micron V2 R/C Helicopter.

Built By John at: RCHobbyHelicopter.com

Parts Used:

Micron V2 Barebones Kit From PrescisionHeli with out the brushed motors (main and tail).

Losi Brushless 1/36 10250kv motor (main)

3.5gram Brushless outrunner motor (tail)

Feigao 6amp brushless Speed Controllers x2

E-Sky Heading Hold Gyro (removed from it's case)

Spektrum Nano 2.4ghz reciever

Walkera 4-3 servos-x2

Walkera 4-3 geared tailbox with micron tail blade

Walkera 4-3 Main Blades

Micron V2 250mah Li-Po Battery

Transmitter Used: Spektrum 2.4ghz DX7

Next We will talk more about the build and put up a video.

Also See My Videos On YouTube At: http://www.youtube.com/user/JohnIn2SonAZ

Also See My Build Threat on rcgroupsforum At: http://www.rcgroups.com/forums/showthread.php?t=807946

And See our New Web Site At www.RCHobbyHelicopter.com