I just got Finished testing the Hirobo S.R.B. Quark R/C Helicopter Today.
My Impressions are:
This is a very stable Heli and would be good for the beginner and intermediate Pilot. Perfect for flying in your livingroom!
DETAILED DESCRIPTION:
Features:
Indoor or Outdoor flight (Outdoor flight at less then 3mph winds)
Foam Main and tail blades to prevent injury and damage
Soft plastic stabilizer to absorb damage. At the time of a crash, the whole stabilizer comes off to lessen the damage
On the Rotor Head, the bell, Hiller, and pitch is fixed. Blade and stabilizer angle is fixed at a 45°angle. While the head design is not for acrobatics, ARB will be the most stable helicopter in the same class.
The Main circuit unit includes FM PPM reciever, gyro and ESC(for both main and tail rotor)
A new designed battery and charger is used. The lightweight battery enables 10 minutes of flight with approx one hour charge. Charger is eqipped with cell balancer.
Includes:
Tool sets: Phillips/ slotted screwdrivers, 0.89mm/1.5mm L wrenches
S.R.B. Charger
S.R.B. Battery
Blade Balancer
Spare blades (4 sets Main Blades, 4 sets Tail Blades)
4ch Transmitter (transmitter from the X.R.B. series can be used as well)
Red and yellow decals
Specifications:
Gear Ratio: 5.29:1 (Main Blade), 4:1 (Tail Blade)
Length: 350mm
Height: 146mm
Width: 72mm
Main Rotor Diameter: 355mm
Tail Rotor Diameter: 106mm
Weight: 170g
Features:
Indoor or Outdoor flight (Outdoor flight at less then 3mph winds)
Foam Main and tail blades to prevent injury and damage
Soft plastic stabilizer to absorb damage. At the time of a crash, the whole stabilizer comes off to lessen the damage
On the Rotor Head, the bell, Hiller, and pitch is fixed. Blade and stabilizer angle is fixed at a 45°angle. While the head design is not for acrobatics, ARB will be the most stable helicopter in the same class.
The Main circuit unit includes FM PPM reciever, gyro and ESC(for both main and tail rotor)
A new designed battery and charger is used. The lightweight battery enables 10 minutes of flight with approx one hour charge. Charger is eqipped with cell balancer.
Includes:
Tool sets: Phillips/ slotted screwdrivers, 0.89mm/1.5mm L wrenches
S.R.B. Charger
S.R.B. Battery
Blade Balancer
Spare blades (4 sets Main Blades, 4 sets Tail Blades)
4ch Transmitter (transmitter from the X.R.B. series can be used as well)
Red and yellow decals
Specifications:
Gear Ratio: 5.29:1 (Main Blade), 4:1 (Tail Blade)
Length: 350mm
Height: 146mm
Width: 72mm
Main Rotor Diameter: 355mm
Tail Rotor Diameter: 106mm
Weight: 170g
I will see if i can stock this great heli on our website soon!
Happy Hovering, John w.
